FINILEC INSTANT PUNCTURE REPAIR 500ml

Description

Product Benefits
* Latex bonds with the rubber
* Seals punctures immediately
* Compatible with all tyres for cars, caravans, trailers, MPVs
and 4 x 4s
* Quick and easy to use
Directions for Use
1. If possible remove the object causing the puncture and move the vehicle so that the puncture is at the bottom of the
wheel then deflate the tyre completely
2. Shake can vigorously before use. In cold conditions, warm the can in your hands or in the warm air from your car
heater vent
3. Clean tyre valve thread and screw connection tube firmly onto the tyre valve
4. Hold can upright and press the button to release the latex foam into the tyre until the tyre is firm
5. IMMEDIATELY DRIVE AT LEAST 3 – 6 MILES (5 – 10 KM) to allow the latex to spread in the tyre and mend the
puncture. DO NOT EXCEED 30 MPH (50 KPH) DURING THIS TIME
6. At the earliest opportunity stop and adjust the tyre pressure in accordance with the manufacturers handbook
FINILEC INSTANT PUNCTURE REPAIR IS A TEMPORARY REPAIR. THE TYRE MUST BE PERMANENTLY
REPAIRED OR REPLACED AS SOON AS POSSIBLE.
Important:
Do not use if tyre is displaced from wheel rim, if there is damage to the sidewall of the tyre or if the tyre has a large
hole. When taking the tyre to be repaired or replaced, prior to the tyre repairer starting work inform them that you have
used Finilec Tyre Repair and show the can.
IMPORTANT NOTE TO TYRE REPAIRER:
Repair the tyre in an open, well ventilated area. Do not weld on the tyre rim or near the tyre.