MOTOVERDE BIKE WASH CONCENTRATE 1L WITH MIXER SPRAYER

Description

Bike Wash Concentrate accompanied with our revolutionary Mixer Sprayer is the perfect cleaning solution for your bike. Our Mixer Sprayer hose attachment will dilute our concentrated formula at 20:1. This releases the correct amount of cleaning power for your ride, leaving perfect results every time.

Using only your garden hose, our Mixer Sprayer attaches directly to a quick release connector. The white switch is used to enable water flow on and off. The green switch will allow product flow and can be switched on and off. With the product switched off you can use the water flow to pre-rinse and rinse when you’e finished cleaning. Once the product switch is opened the product will be sucked into the water stream and it will create a bubbly blanket of detergent. It is also best practice to cover you wash mitt or sponge in the mixture of detergent and water. Once your bike is covered you can turn off both switches and set it aside. Using the wash noodle or sponge, agitate your bike and watch it transform before your eyes. Turn on the white switch only and rinse your bike.

• Motoverde Bike Wash is 100% salt-free, with no corrosive components in the product making it the safest cleaner on the market!
• High-foaming product that clings to your bike and does the work for you!
• Completely safe to use on all surfaces including paints, plastics, anodised parts, sensitive metals (including aluminium) and carbon fibre.
• Tough on dirt but gentle to your bike. Our bike cleaner will remove mud, dirt and grime with ease, whilst also removing sand and clay stains!
• Can also be used on your kit, boots and helmets.
• Contains UV protection to protect your paint colours from fading in sunlight.
• Safe for use on all E-Bikes.
• Fully biodegradable with recyclable packaging*

• Connect the Mixer Sprayer to your hose pipe.
• Turn the White switch on to enable water flow.
• Turn the green switch on to activate the product into the water flow.
• Cover your motocross bike, bicycle or motorcycle with Bike Wash.
• Agitate with a sponge or soft brush.
• Turn White switch on ONLY and rinse your bike.
• For kits: add at least 250ml of concentrated product into a bucket of warm water and submerge your kit inside.
• You can also throw in your goggles and straps before leaving to soak overnight.
• The following morning, remove your goggles and straps and rinse under a tap until all chemical excess has been removed then leave to air dry.
• With trousers, place these on the floor and agitate the bottom area with a sweeping brush to loosen excess dirt before placing directly into your washing machine, alongside kit top.
• Wash your kit at 30 degrees on a normal wash or sports wash.
• At the end of the wash cycle your kit will be the cleanest you have seen it since the day you purchased it!
• For boots and helmets: simply spray product (once diluted) all over and leave to soak for 15 minutes before agitating with a brush/sponge if required. Rinse off!